อุปกรณ์ขยายสัญญาณ
HDMI Extender
Introduction
200M HDMI IP Extender is based on TCP/IP standard. It transmits your HD display with the
high resolution up to 200 meters away from your DVD or computer source by using one CAT5e/6
cable. At the same time, its convenient to transmit HDMI audio and video source by point to
point mode, point to multipoint, multipoint to multipoint mode and cascade connection mode .
Features
*Support HDCP1.4
*Decoding Mode MJPEG
*Supportpoint to point mode, one point to multi point modeand cascade connection mode.
*802.3 Ethernet standard.
*Selectable USB mouse and keyboard extension
*The design of pure hardware, plug and play, no need for additional software.
The Package contents
Transmitter 1PC
Receiver 1PC
5V Power adapter 2PCS
Users Manual 1PC
Physical interface diagram
Note: USB function is optional, if you need this function, select the appropriate model.
Connection and operation
- Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of transmitter by HDMI cable.
- Connect the HDMI out of Receiver to HDTV display by HDMI cable.
- Connect the Transmitter and Receiver with one cat5e/6 cable (recommend).the furthest distance is 200M.
- Connect the 5V Power supply to the device and power on the video transmi ssion device. WhenRX and TX are connected through the network cable, one indicator blinks. When a signal is connected, one indicator on the network port lights up.
Application diagrams
This device supports network cable direct connection or access to th e switch one to one/one to
many/many to many and other methods of use, the following figure to a send and receive as an
example:
1: Only HDMI style support a send more than one receive method of use, HDMI + USB style a send more than one receive when only access to the first receiver support USB keyboard and mouse.
2: One to one and multiple send multiple receive method two ways HDMI style and HDMI + USB style are supported. When sending multiple receivers, the number of transmitters and receivers should be the same, and you need to change the IP of transmitters and receivers, the specific change method is attached.
3: When accessing the network, the occupied bandwidth data depends on the number of transmitters in the same network, each transmitter occupies 60-80M bandwidth.
Innovation
MakeWebEasy